• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

It is essential to clean and oil upvc window repair windows and doors regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is large, you might want to use security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's crucial to act when you realize that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need to open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need close the window and perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open in a breeze it could be the hinges that are at fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window but it's much easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to give assistance.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the possibility of a window repairs near me sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges can also become unbalanced due to wear, causing gaps where the sash meets frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes filled with some type of filler. They can be put on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.